Hastelloy Threaded Tee
Hastelloy UNS N10276 Forged Threaded Tees, UNS N06022 Forged Threaded Unequal Tee, Hastelloy 2.4819 Forged Threaded Tee, Hastelloy C276 Forged Threaded Equal Tees Stockist, Nickel Alloy C22 Threaded Tee Exporter, Manufacturer in Mumbai, India.


Prisha Alloys is a well-known supplier and trader of Hastelloy Threaded Tee Fittings, which are exceptionally easy to install and remove. Hastelloy C22 Threaded Tee Fittings are known for certain features like it has Sturdy design, Accurate dimensions, Abrasion resistant and more. Hastelloy C276 Threaded Tee Fittings is a screwed united design and include three interconnected pipes, two internally threads and a centrepiece that depicts the end together when being turned around. Extremely appropriate for quite a lot of industries, Alloy C22 Threaded Tee Fittings are being manufactured by using one of the top qualities of material, together with prime techniques according to the set norms.
Buy Ready Stock of Hastelloy C22 Threaded Unequal Tee, ASME B16.11 Hastelloy C276 Threaded Tee, ASME SB564 Hastelloy Alloy DIN 2.4602 Threaded Tee Dealer, Hastelloy UNS N06022 Forged Threaded Tee Exporter, ASME / ANSI B16.11 Hastelloy Threaded Equal Tee Supplier Manufacturer in India.
ASTM B564 Hastelloy Threaded Tee Specification
Hastelloy C22/ C276 Threaded Tee Specifications | ASTM B564 / ASME SB564 |
---|---|
Hastelloy C22/ C276 Threaded Tee Size | 1/8″ NB TO 4″ NB |
Hastelloy C22/ C276 Threaded Tee Dimensions | ASME 16.11, MSS SP-79, MSS SP-95, 83, 95, 97, BS 3799 |
Hastelloy C22/ C276 Threaded Tee Pressure Class | 3000 LBS, 6000 LBS, 9000 LBS |
Types | Threaded / Screwed |
Manufacturing process | Push, Press, Forge, Cast, etc. |
Grades | Hastelloy C 22 (UNS No. N06022), Hastelloy C 276 (UNS No. N10276) |
Hastelloy C22/ C276 Threaded Tee Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
Threaded Tees uses & application |
|
Material Test Certificates (MTC) for Hastelloy Threaded Tee as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Equivalent Grades ASTM B564 Hastelloy Threaded Tee
STANDARD | WERKSTOFF NR. | UNS | JIS | EN | GOST | OR |
Hastelloy C22 | 2.4602 | N06022 | NW 6022 | NiCr21Mo14W | – | – |
Hastelloy C276 | 2.4819 | N10276 | NW 0276 | NiMo16Cr15W | ХН65МВУ | ЭП760 |
ANSI 16.11 Hastelloy Threaded Tee Chemical Composition
Grade | C | Mn | Si | S | Co | Ni | Cr | Fe | Mo | P |
Hastelloy C22 | 0.010 max | 0.50 max | 0.08 max | 0.02 max | 2.50 max | 50.015 min* | 20.00 – 22.50 | 2.00 – 6.00 | 12.50 – 14.50 | 0.02 max |
Alloy C276 | 0.010 max | 0.50 max | 0.08 max | 0.03 max | 2.50 max | 50.99 min* | 14.50 – 16.50 | 4.00 – 7.00 | 15.00 – 17.00 | 0.04 max |
ASME SB564 Hastelloy Threaded Tee Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Hastelloy C22 | 8.69 g/cm3 | 1399 °C (2550 °F) | Psi – 1,00,000 , MPa – 690 | Psi – 45000 , MPa – 310 | 45 % |
Hastelloy C276 | 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52,000 , MPa – 355 | 40 % |
Manufacturing Standards of ASME B16.11 Hastelloy Threaded Tee
BS21 | Forged, Threading, Screwed |
BS3799 | Specification for Steel Forged/Threaded fittings, Screwed for the petroleum industry |
ANSI B16.11 | Forged steel fittings and threaded. Screwed/Threaded Fittings |
ANSI/ASME B1.20.1 | Pipe threads, general purpose (inch). |
ISO 4144 | Forged threaded to ISO 7-1. |
Hastelloy Forged Threaded Tee Dimensions NPS 1/2 to 4 - 2000 LBS - ASME B16.11
NPS | Minimum Length of Thread |
Outside Diameter of Band D |
Center to End A |
Minimum Wall Thickness |
|
B | J | ||||
1/2 | 10.9 | 13.6 | 33 | 28 | 3.18 |
3/4 | 12.7 | 13.9 | 38 | 33 | 3.18 |
1 | 14.7 | 17.3 | 46 | 38 | 3.68 |
1¼ | 17 | 18 | 56 | 44 | 3.89 |
1½ | 17.8 | 18.4 | 62 | 51 | 4.01 |
2 | 19 | 19.2 | 75 | 60 | 4.27 |
2½ | 23.6 | 28.9 | 92 | 76 | 5.61 |
3 | 25.9 | 30.5 | 109 | 86 | 5.99 |
4 | 27.7 | 33 | 146 | 106 | 6.55 |
Dimensions threaded Tees - NPS 1/2 to 4 - 3000 LBS - ASME B16.11
NPS | Minimum Length of Thread |
Outside Diameter of Band D |
Center to End A |
Minimum Wall Thickness |
|
B | J | ||||
1/2 | 10.9 | 13.6 | 38 | 33 | 4.09 |
3/4 | 12.7 | 13.9 | 46 | 38 | 4.32 |
1 | 14.7 | 17.3 | 56 | 44 | 4.98 |
1¼ | 17 | 18 | 62 | 51 | 5.28 |
1½ | 17.8 | 18.4 | 75 | 60 | 5.56 |
2 | 19 | 19.2 | 84 | 64 | 7.14 |
2½ | 23.6 | 28.9 | 102 | 83 | 7.65 |
3 | 25.9 | 30.5 | 121 | 95 | 8.84 |
4 | 27.7 | 33 | 152 | 114 | 11.18 |
Dimensions threaded Tees - NPS 1/2 to 4 - 6000 LBS - ASME B16.11
NPS | Minimum Length of Thread |
Outside Diameter of Band D |
Center to End A |
Minimum Wall Thickness |
|
B | J | ||||
1/2 | 10.9 | 13.6 | 46 | 38 | 8.15 |
3/4 | 12.7 | 13.9 | 56 | 44 | 8.53 |
1 | 14.7 | 17.3 | 62 | 51 | 9.93 |
1¼ | 17 | 18 | 75 | 60 | 10.59 |
1½ | 17.8 | 18.4 | 84 | 64 | 11.07 |
2 | 19 | 19.2 | 102 | 83 | 12.09 |
2½ | 23.6 | 28.9 | 121 | 95 | 15.29 |
3 | 25.9 | 30.5 | 146 | 106 | 16.64 |
4 | 27.7 | 33 | 152 | 114 | 18.67 |
Tolerance Chart Of Threaded Tee Fittings
ANSI B16.11 American Standard Dimensional Tolerances | ||
---|---|---|
“A” – Threaded Center To Bottom | For Size 1/8″ And 1/4″ |
± 0.03″ |
3/8″, 1/2″ And 3/4″ | ± 0.06″ | |
1″, 1-1/4″, 1-1/2″ And 2″ | ± 0.08″ | |
2-1/2″, 3″, And 4″ | ± 0.10″ | |
“B” – Threaded Bore Diameter | For Size 1-1/2″ And Smaller |
+ 0.020″ – 0.000″ |
2″, 2-1/2″, 3″ And 4″ | + 0.025″ – 0.000″ |
|
“C” – Threaded Wall Thick. | Min. = 1.09 T (But Not Less Than 5/32″) T = Wall Thickness Of Nominal Pipe Sizes |
|
“D” – Bore Diameter Of Pipe Fitting | For Size 2″ And Smaller |
± 0.030″ |
2-1/2″, 3″ And 4″ | ± 0.060″ | |
“E” – Threadeds- Bottom To Bottom – Full Couplings | For Size 1/8″ And 1/4″ |
± 0.06″ |
3/8″, 1/2″ And 3/4″ | ± 0.12″ | |
1″, 1-1/4″, 1-1/2″ And 2″ | ± 0.16″ | |
2-1/2″, 3″, And 4″ | ± 0.20″ | |
“F” – Bottom Of Threaded To Opposite Face – ANSI B16.11 Half Couplings | For Size 1/8″ And 1/4″ |
± 0.03″ |
3/8″, 1/2″ And 3/4″ | ± 0.06″ | |
1″, 1-1/4″, 1-1/2″ And 2″ | ± 0.08″ | |
2-1/2″, 3″, And 4″ | ± 0.10″ | |
“G” – Gap Of Welding | Approx. 0.06″ Before Welding Recommended Gap |
|
“H” – Min. Flat | Min. Flat = 0.75 X Min. Threaded Wall Thick. |
Hastelloy Threaded Tee Weight Chart
2000# | NPS | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 |
B | – | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/16 | 4 5/16 | 5 3/4 | |
F | – | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 2 1/16 | 2 1/2 | 3 1/8 | |
Weight | – | 0.188 | 0.236 | 0.435 | 0.740 | 1.058 | 1.375 | 1.740 | 2.883 | 7.750 | 11.313 | 19.125 | |
3000# |
1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
B | 29/32 | 1 1/16 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 6 | |
F | 3/4 | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | |
Weight | 0.250 | 0.290 | 0.500 | 0.750 | 1.188 | 1.988 | 2.235 | 3.000 | 4.930 | 7.375 | 13.588 | 19.063 | |
6000# |
1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 1 1/4 | 1 1/2 | 2 | 2 1/2 | 3 | 4 | |
B | 1 1/6 | 1 5/16 | 1 9/16 | 1 27/32 | 2 7/32 | 2 1/2 | 3 1/32 | 3 11/32 | 4 | 4 3/4 | 5 3/4 | – | |
F | 3/4 | 1 | 1 1/8 | 1 1/4 | 1 5/16 | 1 3/8 | 1 11/16 | 1 3/4 | 2 1/16 | 2 1/2 | 3 1/8 | – | |
Weight | 0.250 | 0.640 | 0.500 | 1.438 | 2.188 | 2.785 | 4.688 | 5.750 | 9.500 | 15.000 | 30.563 | – |
Hastelloy C22 Tee | C276 Hastelloy Seamless Tee |
Hastelloy C22 Weldable Threaded Tee | Hastelloy® Alloy UNS N10276 Pipe Tee |
ASME B16.11 Hastelloy Alloy Reducing Tee | C22 Hastelloy Welded Tee |
ASTM B564 C22 Threaded Pipe Tee | ASTM B564 C22 ee Reducing Tee |
Hastelloy N10276 Threaded Tee Supplier | C276 Hastelloy Weld Tee |
Hastelloy Alloy C22 Screwed Tees | ASME B16.11 Tee Supplier |
Hastelloy Threaded Tee #2000 | Hastelloy N10276 Welded Tee Dealer |
Sch 80 Hastelloy C276 Tee | B564 Grade C22 Industrial Threaded Tee |
ANSI B16.11 Hastelloy N06022 Pipe Tee | UNS N10276 Hastelloy Threaded Tee |
C22 Hastelloy Alloy Threaded Tee | Alloy C22 Screwed Short Radius Tee Stockists |
ANSI B16.11 Hastelloy Alloy Tee | Nickel Alloy 2.4602 Hastelloy Short Radius Tee Exporter |
B564 Grade C276 Screwed Tee | ASTM B564 C22 Hastelloy Threaded Pipe Tee |
C276 Hastelloy Threaded Tee | Hastelloy UNS N06022 Threaded Tee |
Hastelloy C276 Weldable Tee | Hastelloy Alloy #3000 Tee |
Hastelloy 2.4602 Threaded Pipe Tee Exporter | 1 Inch Hastelloy Alloy Threaded Tee |
6 Inch Alloy C22 Threaded Tee | Hastelloy Threaded Reducing Tee |
ASTM B564 Hastelloy 2.4602 Tee | ASME B16.11 Hastelloy NiMo16Cr15W Tee |
NiCr21Mo14W Hastelloy Pipe Tee | Alloy C276 Threaded Tee Supplier |
Hastelloy Alloy C22 Wrought Austenitic Tee | ASTM B564 C276 Screwed Tee |
NiMo16Cr15W Hastelloy® Alloy Seamless Tee Dealer | Threaded Hastelloy Tee Stockist |
Hastelloy Alloy Tee Supplier in Mumbai | Hastelloy C22 Threaded Tee Manufacturer in India |
Hastelloy 2.4819 Tee Dimensions | Hastelloy 2.4602 Threaded Tee |
Wrought Hastelloy 2.4602 Threaded Tee | ASTM B564 C276 Seamless Tee at Best Price |
Hastelloy Alloy NiCr21Mo14W Threaded Pipe Tee Supplier | Suppliers of C22 Hastelloy Pipe Tee |
Hastelloy C22 Screwed Forged Tee | Hastelloy C276 Threaded Pipe Tee |
Hastelloy® Alloy Threaded Tee | ASTM B564 Hastelloy Threaded Pipe Tee |
Hastelloy ee High Pressure Threaded Tee | Hastelloy C22 ee 3000LB Threaded Tee |
ASME SB564 Hastelloy C22 Threaded Tee | Hastelloy 2.4602 Forged Threaded Tee |
Hastelloy® Alloy High Pressure Screwed Tee | Hastelloy NW 0276 forged Threaded Tee Manufacturer |
Hastelloy Threaded Forged Tee Supplier | Hastelloy 2.4819 Screwed Forged Tee Dealer |
Nickel Alloy UNS N06022 Threaded Tee | ASME B16.11 Hastelloy NW 6022 Threaded Tee |
ASME SB564 Hastelloy N10276 Threaded Equal Tee | ANSI B16.11 Hastelloy C276 Threaded Forged Tee |
Threaded Short Radius Tee Manufacturers | BS 3799 Forged Tee Exporters in India |
Hastelloy EN NiCr21Mo14W 150 lb.Threaded Fittings Pipe Tee | Hastelloy EN NiMo16Cr15W ANSI B16.11 Forged Tee |
INOX 2.4602 Threaded Tee Exporter | 2.4819 Hastelloy Forged Threaded Tee |